Safety data sheet for Hydrochloric acid

CAS 7647-01-0

This is the free preview of a draft SDS for Hydrochloric acid — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.

Typically documented by: Descaling, pool and industrial pH control.

Draft safety data sheet — preview

Sections 1, 2, 9 of 16

CAS number
7647-01-0
Molecular formula
HCl
Molecular weight
36.46 g/mol
Signal word
Danger

Hazard classification

  • GHS05 — Corrosive
  • GHS06 — Acute toxicity
  • GHS07 — Health hazard — irritant
  • H290: May be corrosive to metals.
  • H331: Toxic if inhaled.
  • H314: Causes severe skin burns and eye damage.
  • H335: May cause respiratory irritation.

Section 1 — Identification

1.1 Product identifier

Product identifier: Hydrochloric Acid

Chemical name (IUPAC): chlorane

CAS number: 7647-01-0

EC number: 231-595-7

REACH registration number: Not required for substances manufactured/imported <1 tonne/year; otherwise confirm the active registrant number before external issue.

IUPAC name: chlorane

PubChem CID reference: 313

Synonyms: hydrochloric acid; hydrogen chloride; Muriatic acid; chlorane; Chlorohydric acid; Anhydrous hydrochloric acid; Acide chlorhydrique; Chlorwasserstoff; Muriaticum acidum; Chloorwaterstof

1.2 Relevant identified uses of the substance or mixture and uses advised against

Relevant identified uses: Laboratory reagent, industrial processing aid, formulation component, and internal product-stewardship review subject to supplier confirmation.

Uses advised against: Consumer, medical, food, or any other use not covered by the supplier's label, technical instructions, or exposure scenario.

Section 2 — Hazards Identification

2.1 Classification of the substance or mixture

Classification according to harmonized EU CLP data: Acute Tox. 3 (Inhalation); Skin Corr. 1B; Eye Dam. 1; STOT SE 3.

2.2 Label elements

Signal word: Danger

GHS pictograms: GHS05 (Corrosion), GHS06 (Toxic), GHS07 (Exclamation)

Hazard statement: H290: May be corrosive to metals.

Hazard statement: H331: Toxic if inhaled.

Hazard statement: H314: Causes severe skin burns and eye damage.

Hazard statement: H335: May cause respiratory irritation.

Precautionary statement: P234: Keep only in original packaging.

Precautionary statement: P390: Absorb spillage to prevent material damage.

Precautionary statement: P260: Do not breathe dust/fume/gas/mist/vapors/spray.

Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection, face protection, and hearing protection.

Precautionary statement: P264: Wash hands thoroughly after handling.

Precautionary statement: P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.

Precautionary statement: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

Precautionary statement: P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

Section 9 — Physical and Chemical Properties

9.1 Information on basic physical and chemical properties

Physical form: Liquid

Appearance: Colorless gas

Odor: Pungent, irritating odor

Melting point: -114.2°C (-174°F)

Flash point: Not available

Density: 1.49 @25 °C

Vapor pressure: 43266 hPa at 21.1°C

Water solubility: Solubility in water, 82.3 g/100 g water at 0 °C; 67.3 g/100 g water at 30 °C; 63.3 g/100 g water at 40 °C; 59.6 g/100 g water at 50 °C; 56.1 g/100 g water at 60 °C

Log Pow (log Kow): 0.25

Vapor density: 1.27 (air = 1)

Lower explosive limit: Not available

Upper explosive limit: Not available

Auto-ignition temperature: Not available

Viscosity: 0.41 cP

pH: Not available

9.2 Other information

Other information: Additional classification-supporting physical hazard data should be confirmed from the customer-specific product specification where required.

Sources

  • ECHA C&L Inventory — harmonised CLP entry
  • PubChem — GHS classification
  • PubChem — compound record
  • PubChem — names and identifiers
  • PubChem — regulatory information
  • PubChem — toxicity data
  • PubChem — transport information

Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.

Measured values for Hydrochloric acid, and where each one comes from

21 measured values for 8 properties, read from 4 public databases. On 3 properties the records differ. Each reading is shown with its own record. Follow any record to read the value at its source.

Boiling point

4 records agree

Used with vapour pressure to judge how readily the substance reaches the air you breathe.

Melting point

4 records agree

Fixes the physical state at handling temperature, which the label and the transport class depend on.

Vapour pressure

4 records differ

The higher it is, the faster the substance evaporates into the workplace air at room temperature.

Vapour density

2 records differ

Above 1 the vapour sinks and collects in pits, sumps and low enclosed spaces.

Density

4 records differ

Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.

Chemical/Physical Properties for Hydrogen chloride.[Table#1587]
Hazardous Substances Data Bank (HSDB)
1.27(relative gas density)
NIOSH Pocket Guide

Solubility

1 record

Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.

(86 °F): 67%
NIOSH Pocket Guide

Viscosity

1 record

Governs how far a spill spreads and how fast it soaks into a surface or a sorbent.

0.405 cP (liquid at 118.16 K); 0.0131 cP (vapor at 273.06 K); 0.0253 cP (vapor at 523.2 K)
Hazardous Substances Data Bank (HSDB)

Odour

1 record

Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.

These are the public records read for Hydrochloric acid, published here unchanged. Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.

Get the full draft SDS for Hydrochloric acid

The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable .docx and a PDF with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.

Intake

Safety Data Sheet (SDS) — $5 per document

Confirm the compound and the document, then continue to checkout. Every document is delivered as a draft for professional review.

Safety Data Sheet (SDS)US OSHA HazCom format · editable .docx draft

A CAS number or a chemical name.

Standard known chemicals only. A mixture or a novel compound stops before checkout and routes to the free mixture classifier or R&D SDS on Pro.

We deliver the draft to this address, normally within 60 seconds.

Branding and formatOptional — default branding, US format

Used to white-label the draft. Leave blank for default branding.

Format

Guest checkout through Stripe. Every document is a draft for review by a qualified EHS professional before you put it to use.