Safety data sheet for Boric acid
CAS 10043-35-3
This is the free preview of a draft SDS for Boric acid — Sections 1, 2 and 9, generated from the sources named below. The full 16-section draft, with your own company in Section 1, is $5 per document.
Typically documented by: Insecticide, slime and craft kits, flux.
Draft safety data sheet — preview
Sections 1, 2, 9 of 16
- CAS number
- 10043-35-3
- Molecular formula
- H3BO3
- Molecular weight
- 61.84 g/mol
- Signal word
- Danger
Hazard classification
- GHS08 — Serious health hazard
- H360fd
Section 1 — Identification
1.1 Product identifier
Product identifier: Boric Acid
Chemical name (IUPAC): boric acid
CAS number: 10043-35-3
PubChem CID reference: 7628
Synonyms: BORIC ACID; Orthoboric acid; Boracic acid; Borofax; Boron hydroxide; Boric acid (H3BO3); Boron trihydroxide; Basilit B; Three Elephant; Boric acid (BH3O3)
1.2 Relevant identified uses of the substance or mixture and uses advised against
Relevant identified uses: Laboratory reagent, industrial processing aid, formulation component, and internal product-stewardship review subject to supplier confirmation.
Uses advised against: Consumer, medical, food, or any other use not covered by the supplier's label, technical instructions, or exposure scenario.
Section 2 — Hazards Identification
2.1 Classification of the substance or mixture
Classification basis: OSHA 29 CFR 1910.1200 Appendix A, aligned to the GHS Rev. 7 hazard classes.
Classification: Repr. 1B
2.2 Label elements
Signal word: Danger
GHS pictograms: GHS08 (Health Hazard)
Hazard statement: H360fd
Precautionary statement: P280: Wear protective gloves, protective clothing, eye protection, face protection, and hearing protection.
Precautionary statement: P203: Obtain, read and follow all safety instructions before use.
Precautionary statement: P318: if exposed or concerned, get medical advice.
Precautionary statement: P405: Store locked up.
Precautionary statement: P501: Dispose of contents/container in accordance with local, regional, national, and international regulations.
Section 9 — Physical and Chemical Properties
9.1 Information on basic physical and chemical properties
Physical form: Solid
Appearance: Colorless, transparent crystals or white granules or powder
Odor: Odorless
Boiling point: 300°C (572°F) at 1013 hPa
Melting point: 171°C (340°F)
Flash point: Not available
Density: 1.5 g/cm³
Vapor pressure: 8 hPa at 25°C
Water solubility: Slightly unctuous to touch; volatile with steam; solubility in water increased by hydrochloric, citric or tartaric acids
Log Pow (log Kow): 0.175
Vapor density: Not available
Lower explosive limit: Not available
Upper explosive limit: Not available
Auto-ignition temperature: Not available
Viscosity: Not available
pH: pH = 5.1 (0.1 Molar)
9.2 Other information
Other information: Additional classification-supporting physical hazard data should be confirmed from the customer-specific product specification where required.
Sources
- ECHA C&L Inventory — harmonised CLP entry
- PubChem — GHS classification
- PubChem — compound record
- PubChem — names and identifiers
- PubChem — regulatory information
- PubChem — toxicity data
- PubChem — transport information
Sections 1.3 and 1.4 are withheld here because the supplier and emergency contact blocks carry your own company details in the draft you buy. Every draft needs review by a competent person before it is issued.
Measured values for Boric acid, and where each one comes from
15 measured values for 9 properties, read from 3 public databases. On 1 property the records differ. Each reading is shown with its own record. Follow any record to read the value at its source.
Boiling point
1 record
Used with vapour pressure to judge how readily the substance reaches the air you breathe.
Melting point
3 records agree
Fixes the physical state at handling temperature, which the label and the transport class depend on.
Vapour pressure
1 record
The higher it is, the faster the substance evaporates into the workplace air at room temperature.
- 1.6X10-6 mm Hg at 25 °C (2.136X10-4 Pa); log P (in Pa) = 26.83 - 9094/T where T is deg K
- Hazardous Substances Data Bank (HSDB)
Density
3 records differ
Needed to convert between mass and volume on the label, in transport papers and in a spill estimate.
- 1.5 g/cu cm
- Hazardous Substances Data Bank (HSDB)
- 1.435 @25 °C
- PAC Chemical Database, U.S. Department of Energy
Solubility
3 records, each a different case
Determines spill behaviour, the right extinguishing media and the correct first-aid rinse.
- Slightly unctuous to touch; volatile with steam; solubility in water increased by hydrochloric, citric or tartaric acids
- Hazardous Substances Data Bank (HSDB)
- Solubility in water is increased by hydrochloric acid
- Hazardous Substances Data Bank (HSDB)
- In water, 5.0X10+4 mg/L at 25 °C
- Hazardous Substances Data Bank (HSDB)
Partition coefficient (log Kow)
1 record
Indicates whether the substance accumulates in fat or in water, which drives the environmental sections.
- log Kow = 0.175
- Hazardous Substances Data Bank (HSDB)
pH
1 record
Drives the skin and eye corrosion classification for solutions, alongside the corrosivity data.
- pH = 5.1 (0.1 Molar)
- Hazardous Substances Data Bank (HSDB)
Odour
1 record
Odour is a warning property only. Many substances are hazardous well below the concentration you can smell.
Decomposition temperature
1 record
The temperature at which the substance breaks down, often into products more hazardous than itself.
- Boric acid decomposes in heat above 100 °C forming boric anhydride and water
- Hazardous Substances Data Bank (HSDB)
These are the public records read for Boric acid, published here unchanged. Where two records disagree, the draft you buy states the value and names the record behind it, so a reviewer can see what was chosen. Every draft needs review by a competent person before it is issued.
Get the full draft SDS for Boric acid
The draft covers all 16 sections under OSHA 29 CFR 1910.1200 and GHS Rev. 7, or the CLP EC 1272/2008 layout for the EU. Each draft arrives as an editable .docx and a PDF with an appendix naming the source of each value, in about 60 seconds. $5 per document, no account.